The handle installing. Caso CASO WineComfort 180, WineComfort 126, WineComfort 180



For energy saving reasons please ensure that the door is closed when the appliance is turned on.

13.5.2 Feet

There are different feet (3 bigger feet and 1 small foot).

To level your appliance, adjust the small foot at the bottom of the appliance.

13.5.3 The handle installing

The wine cooler comes with one metal stainless steel handle. To install simply screw them to the door with the supplied screws.

To do this, slide the rubber seal on the back of the door to the side to lay open the predrilled holes.

Use the included screws to install the handle on the door.

Then reinsert the rubber seal in the correct position.

13.5.4 Shelves

Storrage depending on kind of bottle and size. You can remove each shelf to store larger bottles.

Usual shelf Lower shelf

To remove a shelf: Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out, (eventually untighten the screws).

Please note

► Ensure that the shelves are firmly engaged in place before storing any bottles.

► Spread your bottles out as evenly as possible over the shelves, so weight is not concentrated in one point; and make sure your bottles will not touch the back of the cabinet.

32