Safety notices. Caso CASO WineComfort 180, WineComfort 126, WineComfort 180


Add to My manuals
101 Pages

advertisement

Safety notices. Caso CASO WineComfort 180, WineComfort 126, WineComfort 180 | Manualzz

17.1 Safety notices

Attention

► Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs on electrical equipment.

► Improperly performed repairs can cause considerable dangers for the user and damages to the device.

17.2 Fault indications and rectification of faults

The following table assists in localizing and rectifying minor faults.

Fault Possible Cause

Your device is not cold enough or it does not reach the adjusted temperature:

Check the temperature control setting.

External environment may require a higher setting.

The door is open too often. The door is not closed completely. The door seal does not seal properly. Defrost the device.

The light does not work. Contact customer service.

Vibrations & too much noise

& door does not close properly

Check to assure that the wine refrigerator is level. Check the fan. Components are loose. Device touches the wall.

The door is reversed and not properly installed.

The seal is weak. The shelves are out of position.

Contact customer service. LED could not display.

LED display error – Lo

Buttons are not functional

Compressor will not start Room temperature is lower than desired temperature.

Dew on the surface of cabinet

The surface of wine cabinet especially the glass door appear some frost if item in a damp room. This is due to the moisture in the air coming into contact with the cabinet. Please wipe it away with dry cloth.

Liquid sound 1) The sound of compressor when starts or stops working

2) The flowing sound of refrigerant in the refrigeration system

3) The evaporating sound of refrigerant in the evaporator

Condensation formed inside the cabinet

Under the environment with high level of humidity or the door of wine cabinet has been left open for a long period or opened frequently, wipe off the door and walls. Open the door as rarely as possible.

Error code E2 Desired temperature is not reached.

If necessary defrost the device (Please follow the hints for manual defrosting in chapter cleaning).

37

advertisement

Related manuals

advertisement

Table of contents