Additional functions. John Lewis JLBIOS651

Additional functions

Favourites

You can save your favourite settings, such as duration, temperature or heating function. They are available in the menu: Favourites. You can save 20 programmes.

Saving a programme

1. Turn on the oven.

2. Set a heating function or an automatic programme.

3. Press again and again until the display shows: SAVE.

4. Press to confirm.

The display shows the first free memory position.

5. Press to confirm.

6. Enter the name of the programme.

The first letter flashes.

7. Press or to change the letter.

8. Press .

The next letter flashes.

9. Do step 7 again as necessary.

10. Press and hold to save.

You can overwrite a memory position. When the display shows the first free memory position, press or and press to overwrite an existing programme.

You can change the name of a programme in the menu: Edit Programme Name.

Activating the programme

1. Turn on the oven.

2. Select the menu: Favourites.

3. Press to confirm.

4. Select your favourite programme name.

5. Press to confirm.

You can press to go directly to menu:

Favourites.

Using the Child Lock

When the Child Lock is on, the oven cannot be turned on accidentally.

If the Pyrolysis function works, the door locks automatically.

A message comes on in the display when you press any symbol.

1. Press to turn on the display.

2. Press and at the same time until the display shows a message .

To turn off the Child Lock function repeat step

2.

Function Lock

This function prevents an accidental change of the heating function. You can turn it on only when the oven works.

1. Turn on the oven.

2. Set a heating function or setting.

3. Press again and again until the display shows: Function Lock.

4. Press to confirm.

If the Pyrolysis function works, the door is locked and the symbol of a key comes on in the display.

To turn off the function, press . The display shows a message. Press again and then to confirm.

Oven User Manual 31

When you turn off the oven, the function also turns off.

Set + Go

The function lets you set a heating function (or a programme) and use it later with one press of any symbol.

1. Turn on the oven.

2. Set a heating function.

3. Press again and again until the display shows: Duration.

4. Set the time.

5. Press again and again until the display shows: Set + Go.

6. Press to confirm.

Press any symbol (except for ) to start the function: Set + Go. The set heating function starts.

When the heating function ends, a signal sounds.

• Function Lock is on when the heating function works.

• The menu: Basic Settings lets you turn the function: Set + Go on and off.

Automatic switch-off

For safety reasons the oven turns off after some time, if a heating function works and you do not change any settings.

The Automatic switch-off does not work with the functions: Light, Food Sensor, Duration, End

Time.

Brightness of the display

There are two modes of display brightness:

Day brightness

It is on when the oven is turned on.

It is on for 10 sec when you touch any sensor field during the night brightness mode.

It is on when the oven is turned off and you set the function: Minute

Minder. When the function ends, the display goes back to the night brightness.

Night brightness

When the oven is turned off, the display is in night brightness mode between 10 PM and 6 AM.

Cooling fan

When the oven operates, the cooling fan turns on automatically to keep the surfaces of the oven cool. If you turn off the oven, the cooling fan can continue to operate until the oven cools down.

(°C)

30 - 115

120 - 195

200 - 245

250 - maximum

(h)

12.5

8.5

5.5

3

32 Oven User Manual