advertisement
12
Simple
Recording
1
4
7
TV/VCR
SIMPLE PLAYBACK AND RECORDING (cont.)
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
NUMBER
2
5
8
0
CH
3
6
9
CH
™ £ q
2 5 / 8
3
ENTER
1
2
3
4
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
SELECT RECORDING
CHANNEL
Press CH
5∞
. Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.)
●
If you use the RF connection, by pressing the TV/VCR button, select VCR mode to view the program to be recorded.
SET TAPE SPEED
Press SP/EP to set the recording speed.
START RECORDING
Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel.
B.E.S.T. takes place at the beginning of both the first
SP and the first EP recording after inserting the cassette (
Z
pg. 23).
5
6
PAUSE/RESUME
RECORDING
Press PAUSE. Press PLAY to resume recording.
●
During record pause, you can change the recording channel by using the CH 5∞ buttons or NUMBER keys.
STOP RECORDING
Press STOP or STOP/EJECT. Then press STOP/EJECT to remove the cassette.
SP/EP
PLAY
REC
PAUSE
Recording Resume Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume automatically when power is restored to the VCR.
Accidental erasure prevention
●
To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
advertisement