advertisement
6
Tuner
TV/VIDEO
MENU
6 q
POWER
OK
OK
CH
MENU
INITIAL SETTINGS (cont.)
Set Receivable Channels
1
TURN ON THE VCR
Press POWER. If watching on channel 13, press TV/
VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel.
ACCESS MAIN MENU
SCREEN
Press MENU as many times as necessary .
2
3
ACCESS TUNER SET
SCREEN
Place the arrow next to "TUNER SET" by pressing
CH
5∞
, then press OK.
4
ACCESS BAND SCREEN
Place the arrow next to
"BAND" by pressing
CH
5∞
, then press OK.
TUNER SET
= BAND
AFC
AUTO CHANNEL SET
MANUAL CHANNEL SET
PRESS ( 5 , ∞ ), THEN (OK)
PRESS (MENU) TO END
5
SET FREQUENCY BAND
If you receive your TV channels from an external antenna, select "TV". If you receive your TV channels from a cable TV system, select "CATV". Place the arrow next to your choice by pressing CH
5∞
, then press MENU to return to the Tuner Set screen.
BAND
TV
= CATV
PRESS ( 5 , ∞ ) TO SELECT
PRESS (MENU) TO END
MENU
6 q
OK
CH
MENU
6
PERFORM AUTO CHANNEL
SET
Place the arrow next to
"AUTO CHANNEL SET" by pressing CH
5∞
, then press OK. Receivable channels in your area are automatically assigned to the CH
5∞
buttons, and non-receivable channels are skipped.
AUTO CHANNEL SET
(TV)
CH 2 ADD
SCANNING ...
PRESS (MENU) TO END
7
7
NOTES:
● At the end of Auto Channel Set, “SCAN COM-
PLETED” appears on screen.
● If the scan was unsuccessful, “SCAN COMPLETED–
NO SIGNAL” appears on screen. Check the band setting and connections and start again.
RETURN TO NORMAL
SCREEN
Press MENU as many times as necessary.
advertisement