advertisement
VIDEO SP
SKIP SEARCH
PLAY
REW
STOP
H M
PUSH JOG
STOP
6 q
S
PLAY
FF
PAUSE
19
Skip Search
1
SKIP OVER UNWANTED
SECTIONS
Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a 30-second period of fast- motion playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY.
Repeat Playback
1
2
START REPEAT
Press and hold PLAY (until "PLAY" blinks on the front display panel) during playback, then release.
● The entire tape is played back 20 times.
STOP REPEAT
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF, PAUSE or PUSH JOG ™ or
£ also stops Repeat Playback.
Index Search
This function seeks out index codes that are placed on the tape at recording start.
1
START SEARCH
While the tape is stopped, press PUSH JOG ™ or
£ .
2
ACCESS DISTANT CODE
To access a recording 2–9 index codes away, press
PUSH JOG ™ or £ repeatedly until the correct number is displayed on screen (only if SUPERIMPOSE is set to ON (
Z
pg. 18). Playback begins automatically when desired recording is located.
● To find the very beginning of the desired program, press REW or FF and search visually for the start point.
advertisement
Related manuals
advertisement
Table of contents
- 4 Basic Connections
- 5 Clock
- 6 Tuner
- 6 Set Receivable Channels
- 8 Add Or Delete A Channel
- 9 G-Code Setup
- 12 Simple Playback
- 13 Simple Recording
- 14 Playback
- 14 Still Picture/Frame-By-Frame Playback
- 14 Slow Motion/Reverse Slow Motion
- 15 Variable-Speed Search/Reverse Play
- 15 High-Speed Search
- 16 Manual Tracking
- 17 Select The Soundtrack
- 18 Superimpose
- 19 Skip Search
- 19 Repeat Playback
- 19 Index Search
- 20 Instant ReView
- 20 Counter Reset
- 20 Counter Memory
- 21 Tape Position Indicator
- 21 Next-Function Memory
- 22 B.E.S.T. Picture System
- 22 Preparation
- 23 Recording
- 24 Playback
- 25 Recording
- 25 Watching Another
- 25 Display Elapsed Recording Time
- 26 Stereo And SAP (Second Audio Program)
- 26 To Record SAP Programs
- 27 Instant Timer Recording (ITR)
- 28 G-Code Timer Programming
- 30 On-Screen Timer Programming
- 32 Check And Cancel Programs
- 33 Auto SP/EP Timer
- 34 Auto Timer
- 35 TV Multi-Brand Remote Control
- 36 Edit From A Camcorder
- 38 Edit To Or From Another VCR
- 38 Control Two JVC VCRs
- 39 Audio Dubbing
- 40 Power
- 40 Tape Transport
- 40 Playback
- 40 Recording
- 41 Timer Recording
- 41 Other Problems
- 42 Playback
- 42 Recording
- 42 Timer Recording
- 44 Front View
- 44 Rear View
- 45 Front Display Panel
- 45 Remote Control