Manual Tracking. JVC HR-J631T

16

PLAYBACK AND RECORDING FEATURES (cont.)

6 q

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually.

1

2

3

ENGAGE MANUAL

TRACKING MODE

During playback, press the CH

5∞

buttons on the

VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

Press CH

5∞

on the VCR's front panel or remote. Press lightly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

Press the CH

5∞

buttons on the VCR's front panel simultaneously.

● When automatic tracking is re-engaged, video calibration is automatically activated.

CH

NOTE:

During slow-motion playback, simply press CH 5 or ∞ on the

VCR's front panel or remote to adjust tracking.