advertisement
18
MENU
PLAYBACK AND RECORDING FEATURES (cont.)
OK
6 q
OSD
MENU
Superimpose
This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
Press MENU as many times as necessary.
1
2
ACCESS FUNCTION SET
SCREEN
Place the arrow next to "FUNCTION SET" by pressing
CH
5∞
, then press OK.
3
ACCESS SUPERIMPOSE
SCREEN
Place the arrow next to
"SUPERIMPOSE" by pressing CH 5∞ , then press OK.
FUNCTION
AUTO TIMER
= SUPERIMPOSE
2ND AUDIO
AUDIO MONITOR
AUX INPUT
AUTO SP/EP TIMER
PRESS ( 5 , ∞ ), THEN (OK)
PRESS (MENU) TO END
CH 4
SELECT MODE
Place the arrow next to
"ON" or "OFF" by pressing
CH
5∞
.
SUPERIMPOSE
= ON
OFF
PRESS (
5
, ∞ ) TO SELECT
PRESS (MENU) TO END
To recall an indication
1 Press OSD.
n All indications corresponding to the current status are displayed for 5 seconds, leaving the counter information, and RECORD/PAUSE if in the Record Pause mode, on the screen. (No indication during still and search.)
2 Press OSD again to clear the display.
RETURN TO NORMAL
SCREEN
Press MENU as many times as necessary.
5
NOTE:
If you engage the Record Pause mode, RECORD/PAUSE is displayed whether "SUPERIMPOSE" is set to "ON" or "OFF".
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new channel is displayed on the screen for 5 seconds.
Clock time
Tape position indicator
"Cassette Loaded" mark
When a cassette is loaded, the mark is displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
CH 125
THU 12:00 AM
B
+ +
Audio mode indicators
+
RECORD
PAUSE
] SP
E
NORM
HI–FI COUNT
INDEX-1
MEMORY OFF
–1:23:45
Operation mode
When the operation mode is changed, the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is engaged), and ITR *:** (5 sec.).
Tape speed indicator
INDEX indication
Counter reading
Counter memory on/off
advertisement
Related manuals
advertisement
Table of contents
- 4 Basic Connections
- 5 Clock
- 6 Tuner
- 6 Set Receivable Channels
- 8 Add Or Delete A Channel
- 9 G-Code Setup
- 12 Simple Playback
- 13 Simple Recording
- 14 Playback
- 14 Still Picture/Frame-By-Frame Playback
- 14 Slow Motion/Reverse Slow Motion
- 15 Variable-Speed Search/Reverse Play
- 15 High-Speed Search
- 16 Manual Tracking
- 17 Select The Soundtrack
- 18 Superimpose
- 19 Skip Search
- 19 Repeat Playback
- 19 Index Search
- 20 Instant ReView
- 20 Counter Reset
- 20 Counter Memory
- 21 Tape Position Indicator
- 21 Next-Function Memory
- 22 B.E.S.T. Picture System
- 22 Preparation
- 23 Recording
- 24 Playback
- 25 Recording
- 25 Watching Another
- 25 Display Elapsed Recording Time
- 26 Stereo And SAP (Second Audio Program)
- 26 To Record SAP Programs
- 27 Instant Timer Recording (ITR)
- 28 G-Code Timer Programming
- 30 On-Screen Timer Programming
- 32 Check And Cancel Programs
- 33 Auto SP/EP Timer
- 34 Auto Timer
- 35 TV Multi-Brand Remote Control
- 36 Edit From A Camcorder
- 38 Edit To Or From Another VCR
- 38 Control Two JVC VCRs
- 39 Audio Dubbing
- 40 Power
- 40 Tape Transport
- 40 Playback
- 40 Recording
- 41 Timer Recording
- 41 Other Problems
- 42 Playback
- 42 Recording
- 42 Timer Recording
- 44 Front View
- 44 Rear View
- 45 Front Display Panel
- 45 Remote Control