advertisement
REW
C.MEMORY
PLAY
6 q
TIMER
MENU
FF
POWER
21
Tape Position Indicator
The Tape position indicator appears on screen when, from the stop mode, you press FF, REW or perform an Index Search or Instant
ReView. The position of " " in relation to "B" (Beginning) or "E"
(End) shows you where you are on the tape.
B +
COUNT
+ + E
0:33:27
NOTE:
SUPERIMPOSE must be set to ON, or the indicator will not appear (
Z
pg. 18).
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding.
* Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTES:
●
To do the above using the VCR's controls:
During Stop, turn the SHUTTLE all the way to the left and release it instead of pressing REW, and then press PLAY or
POWER within 2 seconds.
●
If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory indicator appears on the front display panel before pressing
REW.
advertisement