Setting up SNMP. Case XLR 550

XLR 550 Manual

Re-boot History: Thu Jan 1 00:00:14 2007 e0 e1 e2 e3 port UP/DOWN port UP/DOWN port UP/DOWN port UP/DOWN p0 p1 p2 p3 pme UP/DOWN pme UP/DOWN pme UP/DOWN pme UP/DOWN count: 0/0 count: 4/3 count: 0/0 count: 0/0 count: 0/0 count: 10/9 count: 7/6 count: 0/0

5.12.

Setting up SNMP

This section has two parts the first part describes the commands that enable you to manage the access privilege levels associated with SNMP community strings, which help control SNMP access to a device.

A community string functions as a password that is used to verify the authenticity of messages that are passed between the XLR500 device and an SNMP manager.

The second part is to configure the SNMP trap information.

Set up> Set SNMP

Setting up the SNMP Server details.

Keyword Description

Community

Enable Enable SNMP traps.

Disable Disable SNMP traps.

Read-Only – Only allow Read Only access to the SNMP management

Read-Write – Allow Read and Write Access to the SNMP Management

Community-String – The name of the community string for the specified SNMP server.

Example - snmp trap host 172.16.0.17 public

Trap

Revision 1.3a Page 30