clear statistics. Case XLR 550

XLR 550 Manual

[Example 18-2] display oam statistics about all port.

XLR550> (enable) show statistics oam all

Port txInfoPdu txEventPdu rxInfoPdu rxEventPdu rxUkCodes KaTimeOut

---- --------- ---------- --------- ---------- --------- --------- s0 0 0 0 0 0 0

XLR550> (enable)

Output Fields keyword description

Port txInfoPdu txEventPdu rxInfoPdu rxEventPdu rxUkCodes

KaTimeOut

Name of the specified port.

Count of transmit information PDU from this port.

Count of transmit event PDU from this port.

Count of receive information PDU to this port

Count of receive event PDU to this port

Count of receive unknown code to this port

Count of keepalive timeout counter to this port

[Example 18-3] display statistics about all PME.

XLR550> (enable) show statistics pme all

PME CV ES SES LOS UAS

---- -------- -------- -------- -------- -------- p0 0 0 0 0 0 p1 0 0 0 0 0 p2 0 0 0 0 0 p3 0 0 0 0 0

XLR550> (enable)

Output Fields keyword

PME

CV

ES

SES

LOS

UAS description

Name of the specified PME.

Code violation counter

Errored seconds counter.

Severely errored seconds counter

Loss of signal

Unavailable seconds counter

4.18.2

clear statistics

To clear statistics.

Usage clear statistics port { all | <port name> } clear statistics oam { all | <port name> } clear statistics pme { all | <pme name> }

Revision 1.3a Page 80

XLR 550 Manual

Arguments keyword Description

<port name> port oam

<pme name>

Name of the port.

<port names> : e0 … e3, s0, all

Clear statistics about the specified port.

Clear statistics about EFM-OAM of the specified port.

Name of PME.

<pme names> : p0 … p3, all

If you enter all keyword in this argument , set all PME to the same value that you supply.

Clear statistics about the specified PME. pme

Confirmation

See also, “ show statistics ”

Examples

[Example 18-4] clear statistics about all port.

XLR550> (enable) clear statistics port all

This command will reset all statistics of all port.

Do you want to continue (y/n) [n]? y

XLR550> (enable)

[Example 18-5] clear statistics about e1.

XLR550> (enable) clear statistics port e1

XLR550> (enable)

[Example 18-6] clear oam statistics about all port.

XLR550> (enable) clear statistics oam all

This command will reset all oam statistics.

Do you want to continue (y/n) [n]? y

XLR550> (enable)

[Example 18-7] clear oam statistics about s1.

XLR550> (enable) clear statistics oam s0

XLR550> (enable)

[Example 18-8] clear statistics about all PME.

XLR550> (enable) clear statistics pme all

This command will reset all statistics of all pme.

Do you want to continue (y/n) [n]? y

XLR550> (enable)

Revision 1.3a Page 81