clear snmp community. Case XLR 550

XLR 550 Manual

4.16.2

clear snmp community

To remove an SNMP community string.

Usage

Arguments keyword clear snmp community [ <community string> ]

<community string>

Description

(Optional) Name of the SNMP community.

If you do not enter <community string>, removes all SNMP community string.

Confirmation

See also, “ set snmp community ” , “ show snmp ” .

Examples

[Example 16-3] remove “ casecomms ” community string

XLR550> (enable) clear snmp community casecomms

XLR550> (enable)

[Example 16-4] remove all community string

XLR550> (enable) clear snmp community

This command will clear all snmp communities.

Do you want to continue (y/n) [n]? y

Cleared all snmp communities.

XLR550> (enable)

4.16.3

set snmp trap

To add and modify an entry into the SNMP trap receiver table.

Usage

Arguments set snmp trap { enable | disable } set snmp trap host <rcvr addr > <rcvr community> keyword enable disable host

Description

Enable SNMP traps.

Disable SNMP traps. host to receive SNMP traps.

<rcvr addr > : IP address of the host.

<rcvr community> : Community string to use when sending traps.

Revision 1.3a Page 74