Memory Allocation. CRS Sam4s ER-650

Memory Allocation

NOTE: You must step through every memory allocation field to implement new memory allocation. If you press CLEAR, at any field you will abort memory allocation processes without making changes. Changes to Memory Allocation will clear all program data. the control lock position menu, press 5 for Memory Allocation programming. The MEMORY ALLOCATION screen displays:

MEMORY ALLOCATION È

TTL AVAIL: 196608

TTL USED: 183880

# PLUS 1000 Å

# PRICE LVLS(1-5) 1

# CLERKS 10

# GROUP TOTALS 20

2. The total available memory is displayed on the first line of the screen (TTL

AVAIL). The total memory currently allocated is displayed on the second line of the screen (TTL USED). The TTL USED field is updated when you complete a change and press ENTER .

Starting at the PLUs field, enter the quantity of each memory field. Press

ENTER after each entry, and the cursor will move to the next field. Page 2 of

Memory Allocation will display after the # OF GROUP TOTALS field is set:

MEMORY ALLOCATION Ç

TTL AVAIL: 196608

TTL USED: 183880

# EJ LINES 1500 Å

# CHECKS 20

Y=HARD/N=SOFT CHK N

# LINES/SFT CH 50

SAM4s ER-650 Service Mode Programming

•

105

3. Continue filling each field until complete. Press ENTER after setting the last field, "# LINES/SOFT CH". The screen will display "ARE YOU SURE ?". N

(No) will display as the default answer to the question. If you wish to implement the new allocation you have entered, press the YES/NO key, then press ENTER .

4. The message "PLEASE WAIT . . . . " displays until the printer prints either:

"MEMORY ALLOCATION OK !" or "MEMORY ALLOCATION SIZE

OVER" if you attempt to allocate features requiring more memory than is available.

5. The menu screen displays when memory allocation programming is completed.

106

•

Service Mode Programming SAM4s ER-650