Function Key Programming. CRS Sam4s ER-650

Function Key Programming

the control lock position menu, press 5 for FUNCTION KEY . The

FUNCTION KEY PROGRAM screen displays:

FUNCTION KEY PROGRAM

PUSH FUNCTION KEY TO

BE PROGRAMMED

2. Press the function key you wish to program.

If the function you wish to program is located on a function look-up key, press the appropriate function look-up key, then press 1 to select STATUS PROGRAM (meaning you wish to program the status of the function not the menu assignment of the function look-up key) then press the digit corresponding to the function you wish to program

SAM4s ER-650 Program Mode Programming

•

153

#/NS the key to view the #/NS function key options:

#/NS KEY PROG. È

DESC1 : NOSALE Å

DESC2 : NON ADD #

KEY DISABLE N

UNDER MGR CONTROL N

INHIBIT NO SALE

AFTER NON-ADD # N

2. Press from the last field or press PAGE DOWN to view the second page of #/NS function key options:

#/NS KEY PROG. Ç

ENFORCE# ENTRY AT

START OF SALE N Å

PRINT ON N/S Y

NON-ADD# PROHIBIT N

COMP. NON-ADD# MUST

MATCH MAX DIGIT N

MAX DIGIT(0-8) 0

3. Press from the last field to return to the FUNCTION KEY

PROGRAM screen, or press ESC at any time to return to the FUNCTION

KEY PROGRAM screen without saving changes.

154

•

Program Mode Programming SAM4s ER-650

#/NO SALE Function Options

12 character

KEY DISABLE

UNDER MGR

CONTROL

INHIBIT NO SALE

AFTER NON-ADD #

ENFORCE # ENTRY

AT START OF SALE

12 character

Y or N

Y or N

Y or N

Y or N

PRINT ON N/S

NON-ADD #

PROHIBIT

COMP NON-ADD #

MUST MATCH

MAX DIGIT

MAX DIGIT (0-8) 0-8

Y or N

Y or N

Y or N descriptor is NOSALE. default descriptor is NON ADD #.

Select Y to disable this function.

Select Y to allow operation only in manager operation mode.

Select Y if you want disable the NO SALE function after a nonadd number is entered.

Select Y if you wish to enforce the entry of a non-add number at the beginning of each transaction. (For example, to track the number of customers in each sale, or to identify a customer number with each sale.)

Select N to stop printing when a NO SALE is performed.

Select Y to disable the non-add # function.

Select Y if you wish all non-add number entries to have the exact number of digits selected in the MAX DIGIT flag below.

Enter the maximum number of digits for non-add number entry.

Zero (0) means no limit.

SAM4s ER-650 Program Mode Programming

•

155