advertisement
2. Input/output signal settings
2-1-1. Setting the frame synchronizer
The frame synchronizer can be set to On or Off for each input.
The DVI input frame synchronizer is permanently On.
It cannot be set from On to Off or vice versa.
On the Input sub menu, use [F2] to select the input to be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the FS sub menu.
Use [F2] to set On or Off for the frame synchronizer using the FS item.
If the output signal phase is set to 0H, Off cannot be selected as the FS item setting.
AVDL function is active while the frame synchronizer function is set to Off.
The AVDL function automatically adjusts the input image signal phase to the horizontal synchronization reference signal phase.
For details, refer to “2-4. Adjusting the output signal phase”.
76
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 74 2. Input/output signal settings
- 74 2-1. Input signal settings
- 76 Setting the frame synchronizer
- 77 Setting the input mode
- 78 Setting the delay amount
- 78 Freezing the input signals
- 78 Setting the material names
- 79 Setting the up-converter
- 80 Setting the video process function
- 80 Setting the analog input gain (option)
- 81 (option)
- 82 2-1-10. Setting the DVI input signals
- 86 2-1-11. Displaying the DVI input signal information
- 87 2-1-12. Adjusting the DVI input signals
- 87 white level (analog input signals)
- 88 2-2. Output signal settings
- 89 Assigning the output signals
- 89 Setting the SDI output color range
- 90 Setting the DVI output signals
- 92 Setting the down-converter (option)
- 93 2-3. Setting the sync signals
- 93 2-4. Adjusting the output signal phase
- 97 2-5. Setting the multi view display
- 97 Setting the screen layout
- 98 Setting the split frame and characters
- 98 Setting the tally displays
- 99 Changing the material names
- 100 Setting the level meters
- 100 Setting the input signal marks
- 100 Setting the markers
- 100 High-resolution multi view mode
- 101 audio data
- 102 3. System settings
- 102 3-1. Setting the system format
- 103 3-2. Setting the crosspoints
- 103 Assigning signals to the crosspoints
- 104 Setting the crosspoint switching
- 105 Setting the user buttons
- 106 3-4. Setting the date and time
- 107 button illumination
- 108 Alarm status displays
- 109 option information
- 110 Initializing setting data
- 111 4. External interfaces
- 111 4-1. Setting the GPI I/O
- 117 5. Setting menu table
- 139 Appendix (glossary)
- 142 Index