advertisement
2. Input/output signal settings
2-1-7. Setting the video process function
The video process function works for all the SDI input signal images.
The color tones can be changed for each input.
On the Input sub menu, use [F2] to select the input to be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the Video Process1 sub menu.
2-1-8. Setting the analog input gain
(option)
When the analog input board (option) has been connected, the gain of the input signals can be set.
Alternatively, when the analog composite input board (option) has been connected, the gain of the Y signals can be set.
The setting range is ±30 steps, and the gain changes by approximately ±2 dB. The amount of change in the gain when it is changed by one step is not fixed.
On the Input sub menu, use [F2] to select the input to be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the Video Process sub menu.
Use [F2] to select enable (On) or disable (Off) for the video process function using the Video Process item.
Use [F3] to set the Y signal gain using the Y-Gain item.
Use [F4] to set the pedestal level using the Pedestal item.
Use [F1] to display the Video Process2 sub menu.
Use [F2] to set the gain of the input signal (Y signal gain) using the Gain item.
Use [F3] to set the saturation gain using the C-Gain item.
Use [F4] to set the change in the hue using the Hue item.
Copying the settings
The video process settings already selected can be set for other input signals as well.
On the Video Process2 sub menu, use [F5] to select the input signals of the copy destination, and press [F5].
80
advertisement
Related manuals
advertisement
Table of contents
- 74 2. Input/output signal settings
- 74 2-1. Input signal settings
- 76 Setting the frame synchronizer
- 77 Setting the input mode
- 78 Setting the delay amount
- 78 Freezing the input signals
- 78 Setting the material names
- 79 Setting the up-converter
- 80 Setting the video process function
- 80 Setting the analog input gain (option)
- 81 (option)
- 82 2-1-10. Setting the DVI input signals
- 86 2-1-11. Displaying the DVI input signal information
- 87 2-1-12. Adjusting the DVI input signals
- 87 white level (analog input signals)
- 88 2-2. Output signal settings
- 89 Assigning the output signals
- 89 Setting the SDI output color range
- 90 Setting the DVI output signals
- 92 Setting the down-converter (option)
- 93 2-3. Setting the sync signals
- 93 2-4. Adjusting the output signal phase
- 97 2-5. Setting the multi view display
- 97 Setting the screen layout
- 98 Setting the split frame and characters
- 98 Setting the tally displays
- 99 Changing the material names
- 100 Setting the level meters
- 100 Setting the input signal marks
- 100 Setting the markers
- 100 High-resolution multi view mode
- 101 audio data
- 102 3. System settings
- 102 3-1. Setting the system format
- 103 3-2. Setting the crosspoints
- 103 Assigning signals to the crosspoints
- 104 Setting the crosspoint switching
- 105 Setting the user buttons
- 106 3-4. Setting the date and time
- 107 button illumination
- 108 Alarm status displays
- 109 option information
- 110 Initializing setting data
- 111 4. External interfaces
- 111 4-1. Setting the GPI I/O
- 117 5. Setting menu table
- 139 Appendix (glossary)
- 142 Index