2-1-11. Displaying the DVI input signal information. Panasonic VQT3U71A(E), M1111TY0 -FJ
Add to my manuals
145 Pages
advertisement
2. Input/output signal settings
2-1-11. Displaying the DVI input signal information
These are used to display the information concerning the DVI-D input signal images.
The information cannot be changed.
On the Input sub menu, use [F2] to select the input to be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the DVI Status sub menu.
Size
Dot Clock
This indicates the pixel count of the images.
This indicates the dot clock frequency of the images.
H-Frequency
This indicates the horizontal frequency of the images.
V-Frequency
This indicates the vertical frequency of the images.
The formats supported are listed below.
<DVI-D formats supported>
XGA
WXGA
SXGA
WSXGA+
UXGA
WUXGA
1080/50p
1080/59.94p
1080/50i
1080/59.94i
720/50p
720/59.94p
Input video signal
1024
768
1280
768
1280
1024
1680
1050
1600
1200
1920
1200
1920
1080
1920
1080
1920
1080
1920
1080
1280
720
1280
720
Digital
Digital
Digital
Digital
Digital
Digital
Digital (RGB)
Digital (RGB)
Digital (RGB)
Dot clock frequency
(MHz)
65.0
79.5
108.0
146.2
162.0
154.0
148.5
148.5/1.001
74.25
Digital (RGB) 74.25/1.001
Digital (RGB) 74.25
Digital (RGB) 74.25/1.001
Frequency
Horizontal
(kHz)
Vertical
(Hz)
48.36
47.78
60.00
59.87
63.98
65.29
75.00
74.04
56.25
67.50/1.001
28.13
33.72
37.50
44.96
60.02
59.95
60.00
59.95
50.00
60.00/1.001
50.00
60.00/1.001
50.00
60.00/1.001
If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image or disturbed image may appear.
86
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 74 2. Input/output signal settings
- 74 2-1. Input signal settings
- 76 Setting the frame synchronizer
- 77 Setting the input mode
- 78 Setting the delay amount
- 78 Freezing the input signals
- 78 Setting the material names
- 79 Setting the up-converter
- 80 Setting the video process function
- 80 Setting the analog input gain (option)
- 81 (option)
- 82 2-1-10. Setting the DVI input signals
- 86 2-1-11. Displaying the DVI input signal information
- 87 2-1-12. Adjusting the DVI input signals
- 87 white level (analog input signals)
- 88 2-2. Output signal settings
- 89 Assigning the output signals
- 89 Setting the SDI output color range
- 90 Setting the DVI output signals
- 92 Setting the down-converter (option)
- 93 2-3. Setting the sync signals
- 93 2-4. Adjusting the output signal phase
- 97 2-5. Setting the multi view display
- 97 Setting the screen layout
- 98 Setting the split frame and characters
- 98 Setting the tally displays
- 99 Changing the material names
- 100 Setting the level meters
- 100 Setting the input signal marks
- 100 Setting the markers
- 100 High-resolution multi view mode
- 101 audio data
- 102 3. System settings
- 102 3-1. Setting the system format
- 103 3-2. Setting the crosspoints
- 103 Assigning signals to the crosspoints
- 104 Setting the crosspoint switching
- 105 Setting the user buttons
- 106 3-4. Setting the date and time
- 107 button illumination
- 108 Alarm status displays
- 109 option information
- 110 Initializing setting data
- 111 4. External interfaces
- 111 4-1. Setting the GPI I/O
- 117 5. Setting menu table
- 139 Appendix (glossary)
- 142 Index