1.2.1 Transport and installation. INVT XG3-10kW, XG3-10KTL Single-phase On-grid Solar Inverter

Grid-tied single -phase solar inverter Safety precautions

 Operators need to be fully familiar with the composition and operating principle of the entire grid-tied photovoltaic power generation system and related standards of the countries/regions in which the project is located.

 Operators must wear personal protective equipment.

1.2.1 Transport and installation

 During storage or transport, ensure the inverter package and the chassis is intact, dry and clean.

 The movement and installation of the inverter require at least two persons due to its heavy weight.

 Select proper tools for movement and installation to ensure the inverter can operate normally and avoid physical injury. The installation personnel must take mechanical protective measures such as wearing anti-drop shoes or working clothes to protect physical security.

 The inverter must be installed by professional technicians.

 Do not store or install the inverter on or close to flammable and explosive objects;

 Do not install the inverter in the place where children and other public can easily touch

 Remove the metal accessories in hands eg ring or bracelet before device installation and electrical connection to avoid electric shock.

 The solar cell module exposed to the sunlight may generate dangerous voltage.

Users must cover the solar cell with fully-lightproof materials before electrical connection

 The inverter input voltage cannot exceed the max input voltage, otherwise the inverter may be damaged.

 PV grid-connected inverter is not applicable to the positive or negative ground system of solar cell panel.

 Ensure inverter PE is grounded properly, otherwise the inverter cannot run normally.

 Ensure the inverter is installed firmly and electrical wiring is reliable.

Note: PV grid-connected inverter is only suitable for crystalline silicon-type solar battery component.

1.2.2 Grid-connected operation

 Permissions by local electric power agency must be obtained and the inverter grid-connected power generation operation must be done by professional technicians.

 All electrical connections must meet the electrical standards of the

3