- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power adapters & inverters
- INVT
- XG3-10kW
- User manual
2.6.2 LCD operation panel. INVT XG3-10kW, XG3-10KTL Single-phase On-grid Solar Inverter
Add to My manuals40 Pages
The INVT XG3-10KTL Single-phase On-grid Solar Inverter is a grid-tied solar inverter designed for use in photovoltaic systems to convert DC power generated by solar panels into AC power that can be fed into the utility grid. It features advanced MPPT (Maximum Power Point Tracking) technology to maximize energy harvest from the solar array, and is equipped with DRM (Dynamic Reactive power Management) and CT (Current Transformer) for grid stability and power factor correction.
advertisement
![2.6.2 LCD operation panel. INVT XG3-10kW, XG3-10KTL Single-phase On-grid Solar Inverter | Manualzz 2.6.2 LCD operation panel. INVT XG3-10kW, XG3-10KTL Single-phase On-grid Solar Inverter | Manualzz](http://s1.manualzz.com/store/data/073707324_1-172361836cc202af176ceccd2117d4b3-360x466.png)
Grid-tied single -phase solar inverter
2.6.2 LCD operation panel
Product overview
Definition of LCD operation panel:
Figure 2.8 LCD Front View
① ”Run”, running status, shows green light ;
② "Fault", the PV string is disconnected, shows red light;
③ Select upwards, short press to move upwards, long press to return;
④ Select downward, short press to move down, long press to confirm.
LED light display status description :
Indicator light
Instruction State
Green light on
Run
Grid-connected indicator light
Green light off
Green light flashes
0.5s On, 0.5s Off)
Fault
The PV connection indicator light
Red light on
Red light off
Description connected to grid
Not connected to grid
The inverter is in maintenance status
The power-on indicator light, it indicates that at least one of the
PV strings is connected normally and the input voltage is ≥150V
The inverter is disconnected from all PV strings, or the DC input voltage of all MPPT circuits is less than 150V
11
advertisement
Related manuals
advertisement
Table of contents
- 5 1. Safety precautions
- 5 1.1Warning marks
- 6 1.2 Safety guidance
- 7 1.2.1 Transport and installation
- 7 1.2.2 Grid-connected operation
- 8 1.2.3 Maintenance and inspection
- 8 1.2.4 Waste disposal
- 9 2 Product overview
- 9 2.1 PV grid-connected power generation system
- 10 2.2 Product appearance
- 11 2.3 Nameplate description
- 12 2.4 Product model
- 13 2.5 Outline dimension and weight
- 14 2.6 The LED light panel
- 14 2.6.1 The LED light panel
- 15 2.6.2 LCD operation panel
- 16 2.7 Bottom of the inverter
- 17 3 Inverter storage
- 18 4 Installation
- 18 4.1 Unpacking confirmation
- 20 4.2 Prepare before installation
- 20 4.2.1 Installation tool
- 20 4.2.2 Installation environment
- 21 4.3 Space requirements
- 22 4.4 Mounting board size
- 23 4.5 Wall installation
- 23 4.6 Install the inverter
- 25 5 Electrical connection
- 25 5.1 Overview of electrical connections
- 25 5.2 Connect the protective ground wire
- 26 5.3 Connection of PV string
- 28 5.4 Connection of DRM & CT
- 29 5.5 Single-phase inverter grid access
- 30 6 Running
- 30 6.1 Inspection before running
- 30 6.2 Inverter grid-connected running
- 31 6.3 Inverter stop
- 31 6.4 Daily maintenance and inspection
- 31 6.4.1 Periodic maintenance on the inverter
- 32 6.4.2 Maintenance guidance
- 34 7 Troubleshooting
- 38 8 Contact information
- 39 9 Appendix