advertisement
CHAPTER 2 — Box Contents
A Gentle Reminder. . .
YOUR TASK:
Save your box (if you received one).
YOUR OBJECTIVE:
Have a secure container in which to ship your drive back to Plextor, if necessary.
YOUR METHOD:
Find an empty space in your home/office and fill it with the Plextor box.
If you received your UltraPleX CD-ROM drive in a Plextor box, you should save the box after you have installed your drive. There are many sets of hands
— some of them potentially unfriendly — that a drive might go through on its way from us to you. Our box and its packaging material were designed and drop tested to ensure that your UltraPleX drive can endure rough treatment and still arrive in working order.
We advise you to hold on to your box in case you should ever need to return your drive to Plextor. Unfortunately, some of our customers have not held on to their boxes and have had to resort to some less than secure methods to get drives back to us. We have received drives in a shoebox, in an unpadded express mail envelope, and in a box filled with buttered popcorn.
We cannot assume liability for any damage your drive sustains during shipment.
Therefore, please ship your drive in the safest manner possible. We believe your drive will be most secure if it is shipped in a Plextor box. We hope you will never have to ship your drive back to us. If you do, we hope you will send it packaged in a Plextor box.
If you did not receive a Plextor box (if, for example, your drive came pre-installed in a computer), we recommend that you pay a packaging store
(e.g., Mail Boxes Etc.) in your area to ship your drive. The drives that we have received from most packaging stores have arrived in good shape. If you don’t have a packaging store in your area, call our Technical Support Department for packaging pointers before you ship your drive. In fact, you must call our
Technical Support Department to get an RMA number before returning any drive (see Chapter 13, page 66).
6
ULTRAPLEX 40X OPERATION MANUAL
advertisement
Related manuals
advertisement
Table of contents
- 7 1. Introduction
- 9 2. Box Contents
- 10 Internal Drives
- 11 External Drives
- 12 A Gentle Reminder
- 13 3. What Else Do I Need?
- 15 4. Precautions
- 16 5. Drive Features
- 16 PX-40Xi—Front Panel (Int./Ext.)
- 17 UltraPleX 40max Internal Drive—Rear Panel
- 17 UltraPleX Wide Internal Drive—Rear Panel
- 19 UltraPleX 40max External Drive—Rear Panel
- 20 UltraPleX Wide External Drive—Rear Panel
- 21 6. Drive Switch/Jumper/Dial Settings
- 22 Internal Drives
- 25 External Drives
- 26 Other Switch/Jumper Settings
- 27 7. Termination
- 28 Internal Termination
- 28 External Termination
- 29 8. Hardware Installation
- 31 Board Installation
- 34 Drive Positioning
- 35 Mounting an Internal Drive
- 39 External Drive Installation
- 42 Regarding Soundcards and Audio Cables
- 42 Audio Cables
- 44 9. Software Installation
- 46 Windows NT 4.0 (and Below)
- 48 10. Using CD-ROM Discs and Trays
- 48 Tray Loading and Operating
- 49 Cleaning the Disc
- 50 11. How To Play Audio CDs on Your Drive
- 53 12. Troubleshooting
- 53 Guidelines
- 54 Upgrading Firmware
- 54 Technical Support
- 55 12.1 PC Compatibles: Initial Installation
- 62 12.2 PC Compatibles: Existing Installations
- 67 12.3 Apple Macintosh
- 70 How to Contact Us
- 70 Before You email/Log On/Fax/Call
- 71 Returns
- 72 Helpful Contacts
- 73 14. Specifications
- 73 UltraPleX 40max
- 74 UltraPleX Wide
- 75 Appendix: Windows 95/98 Installation Guide
- 90 About Plextor
- 92 Warranty Information