Plextor UltraPleX 40max (PX-40TSe) External 40x CD

CHAPTER 5 — Drive Features

UltraPleX 40max External Drive—REAR PANEL

In and Out (RCA jacks)

Leave these switches at their factory settings unless one or more of the following pertain to you:

Termination: Review Chapter 7 to determine if you need to turn your terminator switch off.

Block Size: If you are working in a UNIX environment and want to boot from your CD-ROM drive, page 20.

Eject Lock: If you work in an environment where you need to prevent others from removing a CD-ROM disc from your drive, page 20.

➁ SCSI ID: Use this dial to designate SCSI ID number. Rotate the dial to change the number. If you are using more than one SCSI peripheral, you may need to change your SCSI ID number, page 19.

amplifier or other audio equipment.

CD-ROM drive to your SCSI host adapter; the other to link your CD-ROM drive to another SCSI peripheral with a daisy chain cable, page 35. You may use either connector for either purpose.

ULTRAPLEX 40X OPERATION MANUAL

13