User Manual HTS Hengstler Terminal Server for Windows

Error Messages

The most common messages:

error 10 opening COMx !

...

Terminal y disabled

COMx not accessible!

> the COM port in question is used and locked by another program under

Windows. HTS cannot cannot handle request for counters connected to this

COM port.

* Terminate the other program or use a free COM port.

Multiple definition for terminal xx

Terminal disabled!

> You are trying to use a duplicate physical counter address for counter with the logical terminal number xx. HTS will not serve this counter.

* Stop HTS; Setup->Terminal Configuration: change the physical address of the appropriate counter and store.

RTC not defined for NULL

Interface disabled!

...

Terminal 1 disabled xx not accessible!

... for all counters

> You have tried to assign more than one counters to the same COM port.

* Stop HTS; Setup->Terminal Configuration: delete all counters except one.

HTS for Windows page 31