BT-LH900P

Supplying the power

An Anton Bauer, V-mount or other such type of battery pack or an AC power source can be used to power this monitor.

Using the Anton Bauer battery pack

1

Install the Anton Bauer type of battery pack.

Battery pack

Using a V-mount battery pack

1

Remove the battery holder.

Battery holder

2

Insert the battery pack and slide it in the direction of the arrow.

2

Install the accessory metal battery mount.

Metal battery mount

Release lever

<Reference>

To remove the battery pack, slide it in the opposite direction to the one in which it was attached while keeping the release lever on the battery holder pulled down all the way.

3

Secure the V-mount adapter using the four screws, and then secure the two screws of the connector section.

V-mount adapter

9