User Manual

Log Setup fGlog Wrn 3000

Re-Verify NO

Press 【←】 or 【→】 key or number key to input log warning number. Press 【OK】 key to confirm. Then press 【C】to save the setting.

2.4.11 Re-Verify time

The Re-verify time is the time interval in which you make continuous records with the same finger (1-250 minutes), then the device will only save the first record. If the re-verify value is “NO”,

It means that you every record saved in the device.

In 【Log Setup】menu, Press 【←】 or 【→】 key and shift to 【Re-Verify】option.

Log Setup

Glog Wrn 3000 fRe-Verify NO

Press 【OK】key to enter re-verify setting interface,

Log Setup

Glog Wrn 3000 fRe-Verify 250

Press 【←】 or 【→】 key or number keypad to input time. Press 【OK】key to confirm. Then press 【C】to save the setting.

Prompt: if the same finger is identified continuously in re-verify time period, only the first record will be saved in device memory.

2.4.12 Hardware Test

Test the functions of machine keys, LCD, voice, scanner and data area.

Select 【Hardware test】option in 【Setup】menu

24

Setup

System

Log Setup fHardware Test press【OK】to enter setting interface as following:

Hardware Test ▼ fKeypad

LCD

Voice

Press 【←】 or 【→】key to choose testing option and press 【OK】key to start.

Keyboard: press 【←】 or 【→】key to select 【Keyboard】option, and press 【OK】 to enter keyboard testing interface. Then press any key to start keys testing (i.e. press key 3, if interface shows current key as 3, it indicates the key 3 works.)

Keyboard

Current key

_3_

Esc-ESC

LCD: press 【←】 or 【→】key to select 【LCD】option, and press 【OK】 to enter LCD testing interface.

键盘当前键值

__ 退出

Esc-ESC Next-OK

Voice: press 【←】 or 【→】key to select 【Voice】option, and press 【OK】 to enter voice testing interface.

Voice

Section 01-15

Esc-ESC

25