User Manual

Sensor: press 【←】 or 【→】key to select 【Sensor】option, and press 【OK】 to enter sensor testing interface.

Sensor

LUM 130

Esc-ESC

Flash: press【←】 or 【→】key to select 【Flash】option, and press 【OK】 to enter flash testing interface.

Two steps,:1. Erase all data; 2. Check

Step 1

Erase All Data

Continue？

Esc-ESC

Step 2

Check... 10%

After checking completed, the interface will show the checking result,

Flash

Flash OK！

Esc-ESC

After each testing is finished, press 【C】key to exit.

2.5 System info

System info shows the current usage status of device, such as user quantity, fingerprint quantity, records quantity and the firmware version etc.

In management mode, press 【←】 or 【→】 key and shift to 【System Info】 option.

MENU

User

Setup fSystem Info

Press 【OK】key to enter system info interface, and check info of correct operated device.

26