DIN-rail Mounting. Advantech EKI-7559MI, EKI-7559SI

Mounting

You can also mount EKI-7559MI/SI on a standard DIN-rail by steps below.

The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.

First, hang the EKI-7559MI/SI to the DIN-rail with angle of inclination. See the figure below.

Figure 2.3-2 Installation to DIN-rail Step 1

EKI-7559MI_SI User Manual 14

Then, hook the device over the DIN rail and let it drop down straight to slide over the rail smoothly.

Figure 2.3-3 Installation to DIN-rail Step 2

15 Chapter2