System Commands Set. Advantech EKI-7559MI, EKI-7559SI

Commands show config show terminal write memory system name

[System Name] system location

[System Location] system description

[System Description] system contact

[System Contact] show system-info ip address

[Ip-address] [Subnet-mask]

[Gateway] ip dhcp show ip no ip dhcp reload default admin username

[Username] admin password

[Password] show admin dhcpserver enable

Dhcpserver disable dhcpserver lowip

[Low IP] dhcpserver highip

[High IP] dhcpserver subnetmask

[Subnet mask] dhcpserver gateway

[Gateway] dhcpserver dnsip

[DNS IP] dhcpserver leasetime

[Hours] dhcpserver ipbinding

[IP address] show dhcpserver configuration show dhcpserver clients show dhcpserver ip-binding no dhcpserver security enable security http security telnet security ip

[Index(1..10)] [IP Address]

3.2.3 System Commands Set

Table 3.3: System Commands Set

Level

G

Description Example

E

Show switch configuration

P

Show console information

P

Save user configuration into permanent memory (flash rom)

Configure system name

G

G

Set switch system location string switch>show config switch#show terminal switch#write memory switch(config)#system name xxx switch(config)#system location xxx

G

Set switch system description string switch(config)#system description xxx

G

Set switch system contact window string switch(config)#system contact xxx

E

Show system information switch>show system-info

Configure the IP address of switch switch(config)#ip address 192.168.1.1

G

G

P

Show IP information of switch

G

Disable DHCP client function of switch

G

Halt and perform a cold restart

G

Restore to default

G

G

Enable DHCP client function of switch

Changes a login username.

(maximum 10 words)

Specifies a password

(maximum 10 words)

P

Show administrator information

G

Enable DHCP Server

255.255.255.0 192.168.1.254

switch(config)#ip dhcp switch#show ip switch(config)#no ip dhcp switch(config)#reload switch(config)#default switch(config)#admin username xxxxxx switch(config)#admin password xxxxxx switch#show admin switch(config)#dhcpserver enable

G

Disable DHCP Server switch(config)#no dhcpserver

Configure low IP address for IP pool switch(config)#dhcpserver lowip 192.168.1.100

G

G

Configure high IP address for IP pool switch(config)#dhcpserver highip 192.168.1.200

Configure subnet mask for DHCP clients switch(config)#dhcpserver subnetmask

255.255.255.0

Configure gateway for DHCP clients switch(config)#dhcpserver gateway 192.168.1.254

G

Configure DNS IP for DHCP clients switch(config)#dhcpserver dnsip 192.168.1.1

G

Configure lease time (in hour) switch(config)#dhcpserver leasetime 1

G

I

Set static IP for DHCP clients by port switch(config)#interface fastEthernet 2 switch(config)#dhcpserver ipbinding 192.168.1.1

P

Show configuration of DHCP server switch#show dhcpserver configuration

P

Show client entries of DHCP server switch#show dhcpserver clients

P

Show IP-Binding information of

DHCP server switch#show dhcpserver ip-binding

Disable DHCP server function switch(config)#no dhcpserver

G

Enable IP security function switch(config)#security enable

G

Enable IP security of HTTP server switch(config)#security http

G

Enable IP security of telnet server switch(config)#security telnet

G

Set the IP security list switch(config)#security ip 1 192.168.1.55

G

EKI-7559MI_SI User Manual 26