802.1x Commands Set. Advantech EKI-7559MI, EKI-7559SI

monitor rx monitor tx monitor

[RX|TX|Both]

show monitor no monitor

Commands show monitor

Level

G

G

Description Example

Set RX destination port of monitor function

Set TX destination port of monitor function switch(config)#monitor rx switch(config)#monitor tx

Show port monitor information switch#show monitor

P

I

I

I

Configure source port of monitor function

Show port monitor information

Disable source port of monitor function switch(config)#interface fastEthernet 2 switch(config-if)#monitor RX switch(config)#interface fastEthernet 2 switch(config-if)#show monitor switch(config)#interface fastEthernet 2 switch(config-if)#no monitor

3.2.13 802.1x Commands Set

Table 3.13: 802.1x Commands Set

8021x enable

[IP address]

[port ID]

[port ID]

[words]

Commands

8021x system radiusip

8021x system serverport

8021x system accountport

8021x system sharekey

[ID]

8021x system nasid

8021x misc quietperiod

[sec.]

8021x misc txperiod

[sec.]

8021x misc supportimeout

8021x misc servertimeout

8021x misc maxrequest

[sec.]

[sec.]

[number]

8021x misc reauthperiod [sec.]

8021x portstate

[disable | reject | accept | authorize] show 8021x

Level

G

G

G

G

G

G

G

G

G

G

G

G

I

E

Description Example

Use the 802.1x global configuration command to enable

802.1x protocols.

Use the 802.1x system radius IP global configuration command to change the radius server IP.

Use the 802.1x system server port global configuration command to change the radius server port

Use the 802.1x system account port global configuration command to change the accounting port

Use the 802.1x system share key global configuration command to change the shared key value.

Use the 802.1x system nasid global configuration command to change the NAS ID

Use the 802.1x misc quiet period global configuration command to specify the quiet period value of the switch. switch(config)# 8021x enable switch(config)# 8021x system radiusip 192.168.1.1 switch(config)# 8021x system serverport 1815 switch(config)# 8021x system accountport 1816 switch(config)# 8021x system sharekey 123456 switch(config)# 8021x system nasid test1 switch(config)# 8021x misc quietperiod 10

Use the 802.1x misc TX period global configuration command to set the TX period.

Use the 802.1x misc supp timeout global configuration command to set the supplicant timeout.

Use the 802.1x misc server timeout global configuration command to set the server timeout.

Use the 802.1x misc max request global configuration command to set the MAX requests.

Use the 802.1x misc reauth period global configuration command to set the reauth period.

Use the 802.1x port state interface configuration command to set the state of the selected port.

Displays a summary of the 802.1x properties and also the port sates.

switch(config)# 8021x misc txperiod 5 switch(config)# 8021x misc supportimeout 20 switch(config)#8021x misc servertimeout 20 switch(config)# 8021x misc maxrequest 3 switch(config)# 8021x misc reauthperiod 3000 switch(config)#interface fastethernet 3 switch(config-if)#8021x portstate accept switch>show 8021x

33 Chapter3