Commands Set. Advantech EKI-7559MI, EKI-7559SI

The following table lists the CLI commands and description.

Table 3.1: Command Level

Modes

User EXEC

Access Method

Begin a session with your switch.

Prompt

switch>

Privileged

EXEC

Enter the enable command while in user EXEC mode.

Global

Configuration

VLAN database

Interface configuration

Enter the configure command while in privileged EXEC mode.

Enter the vlan

database

command while in privileged

EXEC mode.

Enter the interface command with a specific interface while in the Global

Configuration mode switch# switch(config)# switch(vlan)# switch(config-if)#

Exit Method About This Model

Enter logout or quit. The user commands available at the user level are a subset of those available at the privileged level.

Use this mode to

•

Perform basic tests.

•

Display system information.

Enter disable to exit. The privileged commands are the advanced mode. Use this mode to

•

Display advanced function status

•

Save configuration

To exit to the

Privileged EXEC mode, enter exit or

end

To return to the User

EXEC mode, enter

exit

.

Use this mode to configure the parameters to be applied to your switch

Use this mode to configure

VLAN-specific parameters.

To return to the previous mode, enter

exit

or end.

Use this mode to configure the parameters for the switch and

Ethernet ports.

3.2.2 Commands Set List

Table 3.2: Commands Set List

Command Code Word

User EXEC E

Privileged EXEC

Global configuration

P

G

VLAN database

Interface configuration

V

I

25 Chapter3