SNTP Commands Set. Advantech EKI-7559MI, EKI-7559SI

no event smpt

Disable port event for SMTP

I show systemlog

P

Show system log client & server information

3.2.16 SNTP Commands Set

Table 3.16: SNTP Commands Set

switch(config-if)#no event systemlog switch(config)#interface fastethernet 3 switch(config-if)#no event smtp switch#show systemlog

sntp enable sntp daylight sntp daylight-period

[Start time] [End time]

sntp daylight-offset

[Minute]

sntp ip

[IP]

Commands sntp timezone

[Timezone]

show sntp show sntp timezone

Level Description

Enable SNTP function

G

Example

switch(config)#sntp enable

G

G

G

Enable daylight saving time, if

SNTP function is inactive, this command can’t be applied. switch(config)#sntp daylight

Set period of daylight saving time, if SNTP function is inactive, this command can’t be applied.

Parameter format:

[yyyymmdd-hh:mm] switch(config)# sntp daylight-period 20060101-

01:01 20060202-01-01

Set offset of daylight saving time, if

SNTP function is inactive, this command can’t be applied. switch(config)#sntp daylight-offset 3 switch(config)#sntp ip 192.169.1.1

G

Set SNTP server IP, if SNTP function is inactive, this command can’t be applied.

G

Set timezone index, use “show sntp timzezone” command to get more information of index number

P

Show SNTP information

Show index number of time zone

P

list switch(config)#sntp timezone 22 switch#show sntp switch#show sntp timezone switch(config)#no sntp switch(config)#no sntp daylight

no sntp no sntp daylight

G

G

Disable SNTP function

Disable daylight saving time

3.2.17 X-ring Commands Set

Table 3.17: X-ring Commands Set

Commands ring enable ring master ring couplering ring dualhoming ring ringport

[1st Ring Port] [2nd Ring Port]

ring couplingport

[Coupling Port]

ring controlport

[Control Port]

ring homingport

[Dual Homing Port]

show ring no ring no ring master

Level Description Example

P

G

G

G

G

G

G

Enable X-ring

Enable ring master

Enable couple ring

Enable dual homing

Configure 1st/2nd Ring Port

G

G

Configure Coupling Port

Configure Control Port

G

G

Configure Dual Homing Port switch(config)#ring enable switch(config)#ring master switch(config)#ring couplering switch(config)#ring dualhoming switch(config)#ring ringport 7 8 switch(config)#ring couplingport 1 switch(config)#ring controlport 2 switch(config)#ring homingport 3

Show the information of X - Ring switch#show ring

Disable X-ring switch(config)#no ring

Disable ring master switch(config)# no ring master

35 Chapter3

no ring couplering no ring dualhoming

G

G

Disable couple ring

Disable dual homing switch(config)# no ring couplering switch(config)# no ring dualhoming

EKI-7559MI_SI User Manual 36