Spanning Tree Commands Set. Advantech EKI-7559MI, EKI-7559SI

[portbase| 802.1q | gvrp]

no vlan

Ported based VLAN configuration vlan port-based grpname

[Group Name]

grpid

[GroupID]

port

[PortNumbers]

show vlan

[GroupID] or

show vlan no vlan group

[GroupID]

V

No VLAN

V

V

V

Add new port based VALN

Show VLAN information

Delete port base group ID or switch(vlan)#vlanmode 802.1q or switch(vlan)#vlanmode gvrp

Switch(vlan)#no vlan switch(vlan)#vlan port-based grpname test grpid

2 port 2-4

or switch(vlan)#vlan port-based grpname test grpid

2 port 2,3,4

switch(vlan)#show vlan 23 switch(vlan)#no vlan group 2

IEEE 802.1Q VLAN vlan 8021q name

[GroupName]

vid

[VID]

vlan 8021q port

[PortNumber]

access-link untag

[UntaggedVID]

vlan 8021q port

[PortNumber]

trunk-link tag

[TaggedVID List]

vlan 8021q port

[PortNumber]

hybrid-link untag

[UntaggedVID]

tag

[TaggedVID List]

vlan 8021q trunk

[PortNumber]

access-link untag

[UntaggedVID]

vlan 8021q trunk

[PortNumber]

trunk-link tag

[TaggedVID List]

V

V

V

V

V

Change the name of VLAN group, if the group didn’t exist, this command can’t be applied. switch(vlan)#vlan 8021q name test vid 22

Assign a access link for VLAN by port, if the port belong to a trunk group, this command can’t be applied.

Assign a trunk link for VLAN by port, if the port belong to a trunk group, this command can’t be applied.

Assign a hybrid link for VLAN by port, if the port belong to a trunk group, this command can’t be applied. switch(vlan)#vlan 8021q port 3 access-link untag

33

switch(vlan)#vlan 8021q port 3 trunk-link tag

2,3,6,99

or switch(vlan)#vlan 8021q port 3 trunk-link tag 3-20 switch(vlan)#vlan 8021q port 3 hybrid-link untag 4

tag 3,6,8

or switch(vlan)#vlan 8021q port 3 hybrid-link untag 5

tag 6-8

Assign a access link for VLAN by trunk group switch(vlan)#vlan 8021q trunk 3 access-link untag

33 vlan 8021q trunk

[PortNumber]

hybrid-link untag

[UntaggedVID]

tag

[TaggedVID List]

show vlan

[GroupID] or

show vlan

V

V

V

Assign a trunk link for VLAN by trunk group

Assign a hybrid link for VLAN by trunk group switch(vlan)#vlan 8021q trunk 3 trunk-link tag

2,3,6,99

or switch(vlan)#vlan 8021q trunk 3 trunk-link tag 3-

20

switch(vlan)#vlan 8021q trunk 3 hybrid-link untag

4 tag 3,6,8

or switch(vlan)#vlan 8021q trunk 3 hybrid-link untag

5 tag 6-8

Show VLAN information

no vlan group

[GroupID]

V

Delete port base group ID

3.2.7 Spanning Tree Commands Set

Table 3.7: Spanning Tree Commands Set

switch(vlan)#show vlan 23 switch(vlan)#no vlan group 2

Commands spanning-tree enable

Level

G

Description

Enable spanning tree

Example

switch(config)#spanning-tree enable

29 Chapter3