Parent unit. British Telecom Digital Baby Monitor 300, PaperJet 300, 77497

Your BT Digital Baby Monitor 300

Parent unit

Battery LED status indicator

(top of unit)

Red flashing light indicates the batteries are low and need re-charging. Solid red indicates the Parent unit is charging.

Lanyard attach point

You can loop a lanyard

(not supplied) through here.

+ Vol.

Increase speaker volume.

Talk

Press to talk to your baby.

- Vol.

Decrease speaker volume.

Mute is switched on when -Vol is pressed to the lowest level.

Microphone

Mute LED

Steady red indicates that Mute has been switched on.

Baby sound level LEDs

Indicates the level of received sound. The LEDs will light up progressively as the sound increases. See page 13 for further information.

Link status indicator

Steady green indicates that the Baby and Parent units are linked. Flashes green if not linked for the first 30 seconds.

Flashes red if not linked for longer than 30 seconds.

Also flashes green when the

Talk button is pressed on the

Parent unit to initiate parental talk back.

Power on/off

Press and hold to switch the power on or off.

If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp

2250 Baby Monitor 300 UG Iss2.[2].indd 6 10/04/2014 11:06