loudspeaker volume. British Telecom Digital Baby Monitor 300, PaperJet 300, 77497

14 Using your BT Digital Baby Monitor 300

If you try and set the volume higher or lower than the 5 settings available on either unit you will hear a double alert tone.

If the or buttons are pressed while Mute has been set then Mute will be switched off and the loudspeaker volume will return to Level 3 automatically

Adjust the Parent unit loudspeaker volume

There are 5 volume levels and off (Mute).

The default loudspeaker volume is Level 3.

1. Press or to select the required level. You will hear a difference in volume as you keep pressing the button(s).

If you wish to switch the volume off, keep pressing

until the Mute LED turns red.

Crying alert

The crying alert will only be activated if the Parent unit loudspeaker volume has been switched off.

With the volume muted, if your baby starts to cry you will not be able to hear the cries but if the cries sound above a certain level i.e. if they reach 83dB, which is the 1st red Baby sound level LED, then the

Parent unit will emit an audible beep.

The crying alert is a ‘user alert’ as described on page 17.

If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp

2250 Baby Monitor 300 UG Iss2.[2].indd 14 10/04/2014 11:06