Creating pages. Schneider Electric XBTF / TXBTF Graphic Terminals

2. Structure of the applications

Creating pages

The various elements making up pages are defined using the XBT-

L1000 programming software, and then saved in the terminal.

Application pages may be accessed by pressing a configured function key or using the control system variable to initiate a page change.

The development page has the same dimensions as the screen in the graphics display of the configuring software. This means that the appearance of the page being developed is exactly the same as the page being run on the XBT.

Counting

Number of drillings 3137

Change tool at 4000

Page displayed by

XBT-L1000 on the development PC

A

Counting

Number of drillings 3137

Change tool at 4000

Graphic Magelis

A - 17