Application transfer. Schneider Electric XBTF / TXBTF Graphic Terminals

2. Operating Principle

Application transfer

In this mode, 2 types of transfers are possible:

Downloading the Man/Machine dialog application and the protocol for communicating with the control system.

RS232 serial link or PLC network (TXBTs)

PC with XBT-L1000 software

Uploading transfer of an application from the terminal to a PC with the

XBT-L1000 software.

SYST indicator light: the SYST indicator light flashes during the transfer.

XBT-L1000/Terminal transfer procedure

See chapter B, § 11. Transferring the application and the protocol to the terminal, Page 62

.

Wiring: Refer to the terminal instructions for the XBT, or to the TXBT

Magelis Product Line Reference Manual.

See chapter B, § 12.

Transferring the application and the protocol to a PCMCIA card,

Page 64 .

D - 14

Graphic Magelis