TXBT. Schneider Electric XBTF / TXBTF Graphic Terminals

9. Variable adjustment of the PLC register reference value

TXBT

The TXBT can be used to adjust the register reference value of the connected PLC. Adjustment is available for the following communication protocols:

- UniTelway

- EthWay

- Modbus

- Fipway

- Fipio

- Modbus+

See chapter D, § 12. Variables adjustment on the TXBT, Page 68 , for

additional information.

A

XBT

The adjustment page is used to display and modify the register reference values of the connected PLC. The page is directly created on the terminal by selecting the requested variables. Once created, the page is refreshed on a cyclic basis.

The page is locally stored on a PCMCIA card and can thus be re-used even if the terminal has been switched off.

Adjustment of the register reference value is available for all communication protocols.

For more informations, see chapter D, § 13. Variables adjustment on the

XBT, Page 72 .

Graphic Magelis

A - 35