Principle. Schneider Electric XBTF / TXBTF Graphic Terminals

12. Variables adjustment on the TXBT

Principle

The TXBT can be used to adjust the variables of the connected PLCs.

Adjustment is available for the following communication protocols:

- Modbus

Accessible objects

XWAY Protocols

- Simple word

- Double word

- Internal word

- Floating word

- Word bit

- Constant word

- Internal word bit

- Internal double word

- Internal bit

- Local input/output bit

- Remote input/output bit

- System bit

- Step bit

- Step macro bit

- Step macro input step bit

- Step macro output step bit.

- Modbus+

Modbus and Modbus+

The objects accessible for adjustment are input and output registers, input and output bits, bits extracted from registers.

Adjustment can be via the symbols if the symbol/identifier association has been loaded into the TXBT from XBT-L1000.

D - 68

Graphic Magelis