Codes for IP Configuration. Aastra DeTeWe OPENPHONE 52, OpenPhone IPC, OpenCom 100 OpenCom 130, OpenCom 131, OpenCom 150, OpenCom 510, OpenPhone 71, 73, 75, OpenPhone 61, 63, 65, RFP 22, RFP 24, DECT, OpenCom 100 OpenCom 107, OpenPhone 27, OpenCTI 50

Configuration Configuring the OpenCom 107

6.2.8 Codes for IP Configuration

The IP configuration of the OpenCom 107 is performed on the Web console in the

Configurator, in the NET Configuration: LAN menu.

In the event that the IP configuration of the OpenCom 107 has to be changed and access via the Web console is not possible, you can also use a code digit procedure to change these basic settings. Entry can be made from an analogue telephone, an

ISDN telephone and from system telephones.

Set IP address

H *182 Z (system PIN) *

Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #

Set NET mask

H *183 Z (system PIN) *

Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #

Example

Enter: H*1830000*192*168

*99*254#

If required, initiate a system restart with this procedure:

H * 1 8 5 Z (system PIN) #

Use the PIN you entered in the dialogue box for initial access. The factory setting is

“0000”.

6.2.9 Saving and Loading the Configuration

Configurations are saved in a file archive and can be loaded to the OpenCom 107 either locally from a connected configuration PC, or by remote configuration.

The following configuration and customer data can be saved and loaded again:

■

Telephony and network parameters

■

User data

■

Telephone book entries

49