PTQ DNPS App Ref Guide

Configuring the Processor with UnityPro XL PTQ-DNPS ♦ Quantum / Unity Platform

Distributed Network Protocol Interface Module

Whenever you update the configuration of your PTQ module or the processor, you must import the changed configuration from the module, and then build

(compile) the project before downloading it to the processor.

Note: The following steps show you how to build the project in Unity Pro XL. This is not intended to provide detailed information on using Unity Pro XL, or debugging your programs. Refer to the documentation for your processor and for Unity Pro XL for specialized information.

To build (compile) the project:

1

Review the elements of the project in the Project Browser.

2

When you are satisfied that you are ready to download the project, open the

Build menu, and then choose Rebuild all Project. This action builds

(compiles) the project into a form that the processor can use to execute the instructions in the project file. This task may take several minutes, depending on the complexity of the project and the resources available on your PC.

3

As the project is built, Unity Pro XL reports its process in a Progress dialog box, with details appearing in a pane at the bottom of the window. The following illustration shows the build process under way.

After the build process is completed successfully, the next step is to download the compiled project to the processor.

ProSoft Technology, Inc.

April 22, 2008

Page 41 of 153