advertisement
Modifying the Configuration File PTQ-DNPS ♦ Quantum / Unity Platform
Distributed Network Protocol Interface Module
0 to 512 points
Number of digital input points to configure in the DNP slave device. Each point will be stored as a single word in the module memory.
0 to 512 points
Number of analog input points to configure in the DNP slave device. Each point will occupy a two word area in the module memory.
0 to 128 points
Number of floating-point input points to configure in the DNP slave device. Each point will occupy a three word area in the module memory.
7.5.4 Counters
0 to 128 points
Number of counter points to configure in the DNP slave device. Each point will occupy a three word area in the module memory. This number corresponds to the number of frozen counters. The application maps the counters to the frozen counters directly.
0 to 512 points
Number of digital output points to configure in the DNP slave device. Each point will be stored as a single word in the module memory.
0 to 512 points
Number of analog output points to configure in the DNP slave device. Each point will occupy a two word area in the module memory.
0 to 128 points
Number of floating-point output points to configure in the DNP slave device. Each point will occupy a three word area in the module memory.
ProSoft Technology, Inc.
April 22, 2008
Page 69 of 153
advertisement
Related manuals
advertisement
Table of contents
- 2 PLEASE READ THIS NOTICE
- 2 PTQ Installation and Operating Instructions
- 2 Important Notice
- 3 Your Feedback Please
- 9 GUIDE TO THE PTQ-DNPS APPLICATION REFERENCE GUIDE
- 11 START HERE
- 11 Hardware and Software Requirements
- 11 ProTalk Module Carton Contents
- 12 Quantum / Unity Hardware
- 12 PC and PC Software
- 13 Install ProSoft Configuration Builder Software
- 15 CONFIGURING THE PROCESSOR WITH CONCEPT
- 16 Information for Concept Version 2.6 Users
- 16 Installing MDC Configuration Files
- 17 Create a New Project
- 20 Add the PTQ Module to the Project
- 22 Set up Data Memory in Project
- 25 Download the Project to the Processor
- 28 Verify Successful Download
- 33 CONFIGURING THE PROCESSOR WITH PROWORX
- 37 CONFIGURING THE PROCESSOR WITH UNITYPRO XL
- 37 Create a New Project
- 39 Add the PTQ Module to the Project
- 41 Build the Project
- 42 Connect Your PC to the Processor
- 43 Connecting to the Processor with TCPIP
- 44 Download the Project to the Processor
- 45 SETTING UP THE PROTALK MODULE
- 45 Install the ProTalk Module in the Quantum Rack
- 45 Verify Jumper Settings
- 46 Inserting the 1454-9F connector
- 46 Install the ProTalk Module in the Quantum Rack
- 47 Cable Connections
- 47 RS-232 Configuration/Debug Port
- 51 Collision Avoidance (DNP modules only)
- 51 Connect the PC to the ProTalk Configuration/Debug Port
- 55 MODIFYING THE CONFIGURATION FILE
- 55 ProSoft Configuration Builder
- 56 Set Up the Project
- 58 Set Module Parameters
- 60 [Module]
- 60 Module Name
- 60 [PTQ BACKPLANE]
- 60 3x Register Start
- 60 4x Register Start
- 60 [DNP Slave]
- 62 Internal Slave ID
- 62 Baud Rate
- 62 RTS On
- 62 RTS Off
- 63 Min Response Delay
- 63 Modem
- 63 Connect Timeout
- 63 First Character Delay
- 63 Redial Delay Time
- 63 Redial Random Delay
- 63 Idle Timeout
- 64 Phone Number
- 64 Collision Avoidance
- 64 CD Idle Time
- 64 CD Random Time
- 64 CD Time Before Receive
- 64 BI Class
- 64 AI Class
- 65 Float Class
- 65 AI Deadband
- 65 Float Deadband
- 65 Select/Operate Arm Time
- 65 Write Time Interval
- 65 Data Link Confirm Mode
- 65 Data Link Confirm Tout
- 66 Data Link Max Retry
- 66 App Layer Confirm Tout
- 66 Unsolicited Response
- 66 Class 1 Unsol Resp Min
- 66 Class 2 Unsol Resp Min
- 66 Class 3 Unsol Resp Min
- 66 Unsol Resp Delay
- 67 Uresp Master Address
- 67 Uresp Retry Count
- 67 BI with Flag
- 67 BI Events without time
- 67 BO without flag
- 67 Counter with flag
- 67 Frozen counter with flag
- 68 AI with flag
- 68 AI Events with time
- 68 Time Sync Before Events
- 68 Initialize DNP Database
- 68 [DNP Slave Database]
- 69 Binary Inputs
- 69 Analog Inputs
- 69 Float Inputs
- 69 Counters
- 69 Binary Outputs
- 69 Analog Outputs
- 69 Float Outputs
- 70 [DNP Slave Binary Inputs]
- 70 Point
- 70 Class
- 70 [DNP Slave Analog Inputs]
- 70 Point
- 70 Class
- 71 Deadband
- 71 [DNP Slave Float Inputs]
- 71 Point
- 71 Class
- 71 Deadband
- 71 [Secondary Port]
- 72 Baud Rate
- 73 RTS On
- 73 RTS Off
- 73 Min Response Delay
- 73 Collision Avoidance
- 73 CD Idle Time
- 73 CD Random Time
- 73 CD Time Before Receive
- 74 Download the Project to the Module
- 74 Verification and Troubleshooting
- 77 DIAGNOSTICS AND TROUBLESHOOTING
- 77 Reading Status Data from the Module
- 77 Required Hardware
- 78 The Configuration/Debug Menu
- 80 Main Menu
- 84 DNP Database View Menu
- 87 LED Status Indicators
- 88 Clearing a Fault Condition
- 88 Troubleshooting
- 91 REFERENCE
- 91 Product Specifications
- 91 Features and Benefits
- 91 General Specifications
- 92 Hardware Specifications
- 93 Functional Specifications
- 94 Functional Overview
- 94 General Concepts
- 99 Input and Output Data Blocks
- 106 PTQ-DNPS Application Design
- 117 Module Error Codes
- 117 Configuration Error Word
- 117 Slave Port Communication Errors
- 118 System Configuration Errors
- 119 DNP Port Configuration Errors
- 119 Error Status Table
- 123 Command Error Codes
- 125 Master Port DNPS Slave Configuration Values (DNPS Master Slave List)
- 126 Command List Entry Form
- 128 Command List
- 129 DNP Subset Definition
- 137 Internal Indication Word
- 138 Frequently Asked Questions
- 140 DNPS Specific Questions
- 141 SUPPORT, SERVICE & WARRANTY
- 142 How to Contact Us: Sales and Support
- 142 Return Material Authorization (RMA) Policies and Conditions
- 143 All Product Returns
- 143 Procedures for Return of Units Under Warranty
- 144 Procedures for Return of Units Out of Warranty
- 144 Un-repairable Units
- 145 LIMITED WARRANTY
- 145 What Is Covered By This Warranty
- 146 What Is Not Covered By This Warranty
- 151 DISCLAIMER REGARDING HIGH RISK ACTIVITIES
- 151 DISCLAIMER OF ALL OTHER WARRANTIES
- 151 LIMITATION OF REMEDIES
- 151 Time Limit for Bringing Suit
- 152 No Other Warranties
- 152 Intellectual Property
- 152 Additional Restrictions Relating To Software And Other Intellectual Property
- 152 Allocation of risks
- 153 Controlling Law and Severability