advertisement
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and
Thomson.
“x.v.Color (x.v.Colour)” and “x.v.Color
(x.v.Colour)” logo are trademarks of Sony
Corporation.
“BRAVIA” is a trademark of Sony
Corporation.
“PlayStation” is a registered trademark of
Sony Computer Entertainment Inc.
“WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation.
MICROVAULT is a trademark of Sony
Corporation.
VAIO and VAIO Media are registered trademarks of Sony Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance.
MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license.
Other trademarks and trade names are those of their respective owners.
© 2013 CSR plc and its group companies. The aptX
®
mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.
Android™ is a trademark of Google Inc.
Google Play™ is a trademark of Google Inc.
“Spotify” and “Spotify” logos are trademarks of the Spotify Group.
For Software License Information, visit the
Help Guide.
Precautions
On safety
Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
On power sources
• Before operating the receiver, check that the operating voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate on the back of the receiver.
• The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
• If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.
• The AC power cord (mains lead) must be changed only at a qualified service shop.
On heat buildup
Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.
4
GB
On placement
• Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver.
• Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
• Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
• Do not place the receiver near equipment such as a TV, VCR, or tape deck. (If the receiver is being used in combination with a TV, VCR, or tape deck, and is placed too close to that equipment, noise may result, and picture quality may suffer. This is especially likely when using an indoor antenna (aerial).
Therefore, we recommend using an outdoor antenna (aerial).)
• Use caution when placing the receiver on surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or discoloration of the surface may result.
On operation
Before connecting other equipment, be sure to turn off and unplug the receiver.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.
On Bluetooth communication
• Bluetooth devices should be used within approximately 10 meters (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
– When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection
– Locations where a wireless LAN is installed
– Around microwave ovens that are in use
– Locations where other electromagnetic waves occur
• Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your
Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:
– Use this receiver at least 10 meters away from the wireless LAN device.
– Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters.
– Install this receiver and Bluetooth device as closer to each other as possible.
• The radio waves broadcast by this receiver may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this receiver and Bluetooth device in the following locations:
– In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present
– Near automatic doors or fire alarms
• This receiver supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.
• Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology.
5
GB
advertisement