advertisement
Item
SSH
Description
Enter the value to designate the port number for the Secure Shell protocol (default: 22).
Click Apply to save the values and update the screen.
Apply
The ensuing table for Network Port Information settings are informational only and display the following: HTTP, HTTPS, TELNET and SSH.
4.5
L2 Switching
4.5.1
Port Configuration
Port Configuration describes how to use the user interface to configure LAN ports on the switch.
To access this page, click L2 Switching > Port Configuration.
Figure 4.15 L2 Switching > Port Configuration
The following table describes the items in the previous figure.
Item
Port
Enabled
Speed
Duplex
Flow Control
Fiber Port
Enabled
Description
Click the drop-down menu to select the port for the L2 Switch setting
(GE1 to GE8).
Click the radio-button to enable or disable the Port Setting function.
Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Click the drop-down menu to select the duplex setting: Half or Full.
Click the radio button to enable or disable the flow control function.
Click the drop-down menu to designate the port to be used by the fiber ports (GE9 to GE12).
Click the radio-button to enable or disable the fiber port setting function.
38 EKI-9628G User Manual
advertisement