advertisement
▼
Scroll to page 2
of
144
Hardware Installation
Connecting the Network Cable to the PRO/100 PC
Card
Model PRO/100 PC Card (100 or 10 Mbps Ethernet network)
• Plug the network cable into the female RJ-45 connector.
Intel EtherExpress
PRO/100 Mobile Adapter
™
Connecting to the 10Base-T/100Base-TX Adapter Module
Note
The PRO/100 PC Card supports both 10 and 100 Mbps, and auto-detects the network speed.
What to Do Next
After installing the hardware and connecting cables, proceed to
Chapter 2. Software Installation. You will need the Intel Installation
Disk (for Windows 3.1 only) and Network Drivers Disk.
11
C H A P T E R 1
12
advertisement
Key Features
- Integrated 100 Mbps transceiver for fast data transfer speeds
- 16-bit PC Card form factor for easy installation in laptops and other portable computers
- Compatible with a wide range of operating systems, including Windows 95, Windows NT, and MS-DOS
- Supports a variety of network protocols, including TCP/IP, IPX/SPX, and NetBEUI
- LED indicators for easy troubleshooting
- Diagnostic self-test utility for quick hardware проверки
Related manuals
Frequently Answers and Questions
What are the system requirements for the PRO/100 PC Card?
The PRO/100 PC Card requires a computer with a free 16-bit PC Card slot and an operating system that supports the card.
How do I install the PRO/100 PC Card?
To install the PRO/100 PC Card, simply insert the card into a free 16-bit PC Card slot on your computer.
How do I configure the PRO/100 PC Card?
The PRO/100 PC Card is configured using the Intel Network Adapter Configuration Utility, which is included on the software diskette that came with the card.
What are the LED indicators on the PRO/100 PC Card?
The PRO/100 PC Card has three LED indicators: Link, Activity, and Speed.