advertisement
C H A P T E R 2
Banyan VINES version 6.0
NDIS 2.0 Driver
1
Run the Intel Installation Program from Disk 1, Installation Disk.
2
Choose Banyan VINES from the Select Network Operating
System screen.
3
Follow the prompts to complete the Intel segment of the installation. Note the IRQ value set by the Intel Installation
Program for use in step 10 below. The Installation Program also creates a \VINES directory on your hard disk.
4
Copy the files from the VINES Master disk into the VINES directory.
5
Copy the NDIS driver files from \NDIS directory on the VINES
LAN Drivers Disk into the VINES directory.
6
Change to the VINES directory.
7
Type PCCONFIG and select Network Card Settings, followed by
NDIS Ethernet.
8
At the PROTOCOL.INI bindings prompt, type INTELNET.
9
Enter the IRQ value set by the Intel Installation Program (see step
3 above).
10 Press F10 to save and Esc to return to the main menu.
11 Select Login Environment Settings, followed by Default
Communications Driver, followed by NDIS Ethernet.
12 Press Esc to return to the Main Menu and press F10 to save.
13 Reboot the PC.
22
advertisement
Key Features
- Integrated 100 Mbps transceiver for fast data transfer speeds
- 16-bit PC Card form factor for easy installation in laptops and other portable computers
- Compatible with a wide range of operating systems, including Windows 95, Windows NT, and MS-DOS
- Supports a variety of network protocols, including TCP/IP, IPX/SPX, and NetBEUI
- LED indicators for easy troubleshooting
- Diagnostic self-test utility for quick hardware проверки
