advertisement
▼
Scroll to page 2
of
144
Software Installation
Artisoft LANtastic version 6.0
NDIS 2.0 Driver
1
Run the Intel Installation Program from Disk 1, Installation Disk.
2
Choose Artisoft LANtastic from the Select Network Operating
System screen.
3
Follow the prompts to complete the Intel segment of the installation.
4
Run the Artisoft LANtastic 6.0 “install” program. Specify
C:\LANTASTI as the destination directory.
5
At the “Select network adapter” screen, choose “NDIS Support for
Network Adapters.”
6
When prompted for the “manufacturer’s driver disk” on the “Enter
NDIS driver directory” screen, insert the Intel Network Drivers
Disk (Disk 2).
7
Complete the Artisoft installation.
8
Reboot the computer and start LANtastic.
AT&T StarGROUP LAN Manager version 2.1a
NDIS 2.0 Driver
See Microsoft LAN Manager.
21
advertisement
Key Features
- Integrated 100 Mbps transceiver for fast data transfer speeds
- 16-bit PC Card form factor for easy installation in laptops and other portable computers
- Compatible with a wide range of operating systems, including Windows 95, Windows NT, and MS-DOS
- Supports a variety of network protocols, including TCP/IP, IPX/SPX, and NetBEUI
- LED indicators for easy troubleshooting
- Diagnostic self-test utility for quick hardware проверки
Related manuals
Frequently Answers and Questions
What are the system requirements for the PRO/100 PC Card?
The PRO/100 PC Card requires a computer with a free 16-bit PC Card slot and an operating system that supports the card.
How do I install the PRO/100 PC Card?
To install the PRO/100 PC Card, simply insert the card into a free 16-bit PC Card slot on your computer.
How do I configure the PRO/100 PC Card?
The PRO/100 PC Card is configured using the Intel Network Adapter Configuration Utility, which is included on the software diskette that came with the card.
What are the LED indicators on the PRO/100 PC Card?
The PRO/100 PC Card has three LED indicators: Link, Activity, and Speed.