Novell NetWare. Intel ETHEREXPRESS PRO/100

C H A P T E R 2

Novell NetWare

ODI Driver

The Intel ODI driver allows for the concurrent use of Novell NetWare and other protocols that support Novell’s Open Data-Link Interface

(ODI) specification.

NetWare

1

Run the Intel Installation Program from Disk 1, Installation Disk.

2

Choose Novell NetWare from the Select Network Operating

System screen.

3

Follow the prompts to complete the installation.

4

The Intel Installation Program will reboot the computer and verify the NetWare connection.

5

Reboot your computer again.

6

Log in to the network.

Note

The Intel Installation Program uses the NetWare VLM shell to connect to your NetWare server. The Installation Program decompresses and copies all the required files.

If you are installing manually, without the Intel Installation

Program (under MS-DOS or Windows 3.x) you must first decompress the VLM files by running the MS-DOS batch file

DCOMPVLM.BAT from the Network Drivers Disk, as follows:

DCOMPVLM [ path] where [ path] is the directory for NetWare files (usually

C:\NWCLIENT). DCOMPVLM will decompress and copy all required files to the designated directory.

If you need NETX shell support, contact your System Administrator.

If using DOS 5.0, check your CONFIG.SYS file for the statement

LASTDRIVE=Z. If not present, add it.

46