Diagnostic Test Utility Settings (M16ATEST.EXE). Intel ETHEREXPRESS PRO/100

Configuration Reference

Keywords are not case sensitive, and can be abbreviated to a unique sequence of initial characters (for example, IN for INTERRUPT).

Packet Driver Keywords

KEYWORD

FULLDUPLEX

DEFAULT VALID VALUES

(NO KEYWORD = FULL-DUPLEX DISABLED)

INTERRUPT=

IOADDRESS=

IOWAITSTATES=

LINESPEED=

LINKDISABLE

MEMORY=

MEMWAITSTATES=

MODE=

NOCHECK

NOEARLYRX

NOEARLYTX

NOLED

SINT

SOCKET=

WORDSIZE=

5

320

0

AUTO

(3 - 15)

(240 - 380)

(1 - 3)

(10 OR 100)

(NO KEYWORD = LINK INTEGRITY EN

ABLED)

D2000

0

(C0000 - E8000)

(1 - 3)

MEM (MEM OR IO)

(NO KEYWORD = ADAPTER RESOURCE

VERIFICATION ENABLED)

(NO KEYWORD = EARLYRX ENABLED)

(NO KEYWORD = EARLYTX ENABLED)

(NO KEYWORD = LEDS ENABLED)

60

AUTO

16

(60 - 80)

(1 - 4)

(8 OR 16)

Packet Driver Example

A typical sequence for loading the packet driver M16APD.COM with

M16ACFG.EXE and default configuration settings is as follows:

M16ACFG

M16APD

ETHDRV

If nondefault configuration settings are used, these must be stated on the M16APD.COM command line. For example,

M16ACFG

M16APD IOADDRESS=320 INT=7

ETHDRV

Diagnostic Test Utility Settings (M16ATEST.EXE)

The M16ATEST.EXE utility is a Intel utility for testing Intel adapter hardware. It is an MS-DOS executable file.

M16ATEST.EXE tests the adapter hardware functionality, including the PC Card interface, the serial EEPROM, the local SRAM, the

Ethernet controller, and the PHY interface (adapter modules). It displays manufacturing information including serial number and date and time of manufacture. It also displays configuration information including interrupt, I/O address, and starting memory location used.

79