Microsoft Windows NT. Intel ETHEREXPRESS PRO/100

C H A P T E R 2

8 From the Configuration tab in the Network window, click Add.

9 From the Select Network Component Type window, select

Protocol and click Add.

10 Select Microsoft as the manufacturer and IPX/SPX-compatible

Protocol under Network Protocols, then click OK to return to the

Network window.

11 Click OK to close the Network window, then restart the computer when prompted.

Microsoft Windows NT 4.0

NDIS 3 Driver

If your system is running Windows NT 4.0, proceed as follows:

1 Insert the PRO/100 PC Card into a PC Card slot.

2 Select Control Panel, double-click the Network icon. Click the

Adapters tab and then Add.

3 Insert Disk 2, Network Drivers Disk and click Have Disk.

Specify A:\ for diskette and click OK.

4 Select “EtherExpress PRO/100 PC Card Adapter 16.”

5 Click Close when the drivers have been copied.

6 Restart your computer when prompted by NT.

Microsoft Windows NT 3.51

NDIS 3 Driver

If your system is running Windows NT 3.51, proceed as follows:

1 Insert the PRO/100 PC Card into a PC Card slot.

2 Select Control Panel, Network, Add Adapter, and Other.

3 When prompted for a manufacturer’s disk, insert Disk 2,

Network Drivers Disk.

16

4 Select “EtherExpress PRO/100 PC Card Adapter 16.”