advertisement
MX8x8DVI-Pro
User’s Manual
9.
Appendix
9.1. Specifications
Inputs
DVI input signals ....................................................................... 8 x DVI single link
Connectors .................................................................... 24-pole DVI-D digital only
Auto equalization ...................................................... Yes, max 40 dB at 825 MHz
Input cable equalization .................... max. 50 m with 24AWG cable at 1.65 Gbps
EDID......................................................................................... Yes, for each input
Signal
Data rate .......................................... all between 25 Mbps and 1.65 GBPS / color
Channels ........................................................ 1x TMDS Clock + 3x TMDS Colors
Resolutions ..................................... all between 640x480 and 1920x1200@60Hz
Color depth ................................................................................ 24 bits, 8 bit/color
HDTV resolutions .................................................................... 720p, 1080i, 1080p
HDCP compliant ................................................................................................ No
Outputs
DVI output signals ...................................................................... 8x DVI single link
Connectors .................................................................... 24 pole DVI-D digital only
Output pre-emphasis ......................................................................................... No
+5V output current .......................................................... 500mA continuous each
Control
Front Panel buttons ...................................................................... YES, 21 buttons
Serial Port .............................................. 9-pole D-sub Female RS-232 or RS-422
Baud rate ..................................................... 9600 Baud, 8 bit, 1stop bit, no parity
Ethernet port .................................................................... RJ 45 female connector
Ethernet protocol ................................................................. TCP/IP, UDP/IP, ARP
..................................................................... ICMP, SNMP, TFTP, Telnet, DHCP,
BOOTP, HTTP, and AutoIP
General
Power .............................................................. 100-240 V AC 50/60 Hz 1.8..1.0 A
Compliance ....................................................................................................... CE
EMI/EMC ........................................................................ EN 55103-1, EN 55103-2
Safety ......................................................................................... EN 60065 Class I
Rack mount ........................................................................................Yes, 1U high
Enclosure ...................................................................................................... Metal
Enclosure dimensions .......................... 44 mm H x 446 (482) mm W x 303 mm D
Weight .............................................................................................................. 3kg
Warranty .................................................................................................... 3 years
Section 9. Appendix Page 47 / 49
9.2. Mechanical drawings
Info: Dimensions are in mm.
Front view
Top view
Rear view
Left view
Right view
Page 48 / 49 Section 9. Appendix
advertisement
Related manuals
advertisement
Table of contents
- 7 INTRODUCTION
- 9 CONTROLS AND CONNECTIONS
- 11 DVI input
- 12 RS-232/RS-422 control port
- 13 TECHNOLOGIES
- 13 Common problems related to EDID
- 16 OPERATION
- 16 TAKE / AUTOTAKE modes
- 16 Control lock
- 16 Switching
- 17 Presets operations
- 18 VIEW current state
- 18 Output lock
- 19 Changing and viewing current protocol
- 19 Reset factory default DVI signal settings
- 19 Reset factory default (static) IP address
- 20 – USING LIGHTWARE DEVICE CONTROLLER (LDC)
- 24 Grid view
- 26 Tile view
- 29 Preset operations
- 31 About EDID memory
- 32 Changing emulated EDID
- 32 Exporting an EDID
- 32 Importing an EDID
- 32 EDID Summary window
- 33 Editing an EDID
- 33 Creating an EDID (Easy EDID Creator)
- 33 Deleting EDID(s)
- 34 Configuration
- 34 Device information
- 35 User preferences
- 37 – USING THE BUILT-IN WEBPAGE
- 38 PROGRAMMERS’ REFERENCE
- 39 View connection on a specified output
- 39 Switch one input to one output
- 40 Switch one input to all outputs
- 40 View connection on all outputs
- 40 View mutes on all outputs
- 40 Mute specified output
- 41 Unmute specified output
- 41 Save preset to the specified memory location
- 41 Load preset from the specified location
- 41 View product type
- 41 View serial number
- 42 View firmware version of the CPU
- 42 View firmware for all controllers
- 42 Error responses
- 43 – BY LIGHTWARE MATRIX FIRMWARE UPDATER
- 47 APPENDIX
- 49 VERSION APPLICABILITY
- 49 WARRANTY
- 49 DOCUMENT REVISION HISTORY