Register Details Window XML Specification
References
</BITFIELD>
<BITFIELD
BITRANGE="30"
NAME="BI"
DESCRIPTION="Burst inhibit. Note: Following a system reset, the BI bit is set in OR0.">
<BFVALUE VALUE="0" DESCRIPTION="Memory controller drives BI negated (high). The bank supports burst accesses." />
<BFVALUE VALUE="1" DESCRIPTION="Memory controller drives BI asserted (low). The bank does not support burst accesses." />
</BITFIELD>
<BITFIELD
BITRANGE="31"
NAME="V"
DESCRIPTION="Valid bit. When set, this bit indicates that the contents of the base-register and option-register pair are valid. The
CSignal does not assert until the V-bit is set. Note that an access to a region that has no V-bit set may cause a bus monitor timeout. Note also that following a system reset, the V-bit in BR0 reflects the value of ID3 in the reset configuration word.">
</BITFIELD>
</REGISTER>
References
For more information about XML, consult these references:
• XML: A Primer, by Simon St. Laurent, published by IDG Books Worldwide, Inc.
• Presenting XML, by Richard Light, published by Macmillan Computer Publishing.
• The XML Companion, by Neil Bradley, published by Addison-Wesley.
470 IDE 5.7 User’s Guide
Menus
This section contains these chapters:
•
IDE Menus
•
Menu Commands
VIII
IDE 5.7 User’s Guide 471
472 IDE 5.7 User’s Guide
